Progress: Pictures !!!
Here are two pictures of an early prototype.
The red LED in the corner beside the IDE connector is a harddisk activity indicator. The IDE connector is just like you'd find on a PC motherboard, it connects to the hard disk drive with a straight 40-pin ribbon cable.
The power connector fits a standard PC Power supply.
The RS-232 port (no handshake lines, just Transmit, Receive and Ground) is a 9-pin female connector
The IEEE-488 connector hooks up to the PET/CBM, of course. It is just like the connectors on the back of an 8050 floppy disk drive or similar.
0 Comments:
Post a Comment
<< Home